Probes

pH Probe

pH precision is .01 units. Lab grade probe w/ 10' coax cable. Sealed Ag/AgCl reference. Standard BNC Connector

ORP Probe

ORP precision is 1 mV. Lab grade probe w/ 10' coax cable. Platinum band electrode. Standard BNC Connector

Temperature

Temperature precision is 0.1°F High quality probe w/ 6' cable. Encapsulated thermistor 2.5mm Phono Jack Connector

Conductivity Probe

Dual Range 0 to 999 us/cm or 0 to 99.9 ms/cm Lab quality probe w/10' cable Minidin 4 Connector

Oxyguard Dissolved Oxygen Probe

0 to 19.9 ppm Lab quality probe w/10' cable Temperature, Altitude, and Salinity Compensation Minidin 6 Connector

IO Breakout Box

Easily add float switches, water on the floor sensors, etc. to the AquaController 3 or AquaController 3 Pro. Simply plug the Breakout box's minidin 8 cable into the AquaController I/O port, and then attach the float switch, or water on the float switch wires to the quick connector terminals. No soldering or special tools required.

5' Cable plugs into the I/O Connector of the controller. Supports 2 Digital inputs on AC3. Supports 4 Digital inputs on AC3Pro. Supports 6 Digital inputs on PX 1000. Quick Connect Terminals - no soldering required. 2 Mounting Holes for easy installation.

Probe Expansion Hardware (PX 1000)

The first expansion module, the PX 1000 (shown above) , with a pH, ORP, temperature (or 2 pH and 1 temperature), and 6 digital inputs is available now. To order click here. The PX 1000 features are:

Monitor/Control pH, ORP, and tempprobe or 2 pH and temp probe. 6 digital inputs for float switches, water on floor sensors, pressure sensors, etc. Full datalogging support in AquaController and AquaNotes. (1024 data points per measured parameter) Up to 7 expansion modules can be used on the AC3 or AC3Pro. Attaches to AquaController 3's I/O port with a 5' cable. Additional Expansion modules daisy chain off the previous expansion module.